A buried four-rotor lawn system you run by clicking a garden hose into a housing in the lawn: no timer, no wiring, and the same rotors as the 32ETI.
Updated
- 3,000 sq ft Coverage
- 1 Zones
- None (manual) Power
- 6 gpm Minimum flow needed
Pros
- Four 32SA gear-drive rotors pop up 4 in and retract flush for mowing
- Click-n-Go station: push a hose connector in until it clicks to water
- Two filtered drain valves let the buried lines drain
- Manual in English, Spanish and French
- Rain Bird's optional 1ZEHTMR hose timer can automate it later
Cons
- No timer: someone has to connect the hose and turn the faucet each time
- Needs 40 to 75 psi and at least 6 gpm at the faucet
- No fixed-term warranty, only Rain Bird's refund-based satisfaction policy
- We found no Canadian retailer selling it
- Best for
- Small lawns (Rain Bird's table gives about 650 to 1,150 sq ft head to head) where you are happy to connect a hose to water and want buried pop-up rotors.
- Not for
- Anyone who wants watering to happen while they are away (add a hose timer or choose the 32ETI), or yards with weak water flow.
Our verdict
The 32HE is the lowest-cost way we found to put buried pop-up rotors on a hose faucet. It uses the same 32SA rotors as the Rain Bird 32ETI, but four instead of six, 90 ft of tubing instead of 125, and no timer. To water, you lift the lid of the small Click-n-Go housing set flush in the lawn, push the connector on your garden hose down onto it until it clicks, and open the faucet all the way. When the water stops, the heads drop back out of the mower’s path and two filtered drain valves empty the lines.
It suits a small lawn and an owner who is happy to water by hand. The trade-offs are the same water demands as the 32ETI (40 to 75 psi and at least 6 gpm), no backflow device in the box, Rain Bird’s refund policy instead of a warranty in years, and no Canadian seller we could find. If you tire of connecting the hose, Rain Bird’s guide shows its 1ZEHTMR hose timer as an add-on. See how it compares in our sprinkler system kit comparison and our best DIY sprinkler kits.
Coverage and water supply
Rain Bird’s headline figure is up to 3,000 sq ft, but the guide’s own coverage table is more useful for planning. With the heads spaced so each one throws to the next, the four heads cover about 659 sq ft at 6 gpm (an 18 ft throw), 812 sq ft at 8 gpm and 1,156 sq ft at 10 gpm. The guide suggests spacing heads about 15 to 20 ft apart, 3 to 4 in in from a sidewalk or straight edge, and warns that a rise of more than 6 ft from the faucet to any head shortens the throw. Check your faucet with a gauge and a five-gallon bucket first; our guide to measuring water pressure and flow shows how.
Installing it
Before you dig: request a utility locate a few business days ahead, through 811 in the US (Rain Bird’s guide also tells you to call 811) or your province’s one-call center via Click Before You Dig in Canada. Shallow slots for tubing count as digging.
The guide has you lay the tubing on top of the lawn in two runs teed off the housing, screw each rotor onto a threaded tee with PTFE tape, and fit a drain valve at each run end with the tubing sloping down to it. Test with the hose while the heads are staked on top, move any head that leaves a gap, then bury the housing, tubing and heads so their tops sit flush; the guide’s drawing shows about 7.75 in. There is no backflow device in the box: Rain Bird asks you to confirm the faucet has a vacuum breaker and to check local plumbing codes. Rules vary by town, so ask your water utility; our backflow preventer guide explains the options.
We could read only a handful of owner reviews, all on Rain Bird’s own store once reviews written for a coupon were left out, so there is no owner summary for this kit. One owner had tubing pop off the hose connection once the water was on; another found the install straightforward and wished for a little more tubing in the box.
Rain Bird 32HE Sprinkler System with Click-n-Go Hose Connect specs
- 3,000 sq ft Coverage
- 1 Zones
- None (manual) Power
Coverage
| Coverage | 3,000 sq ft |
|---|---|
| Sprinklers or emitters | 4 |
| Tubing included | 90 ft |
| Spray radius (max) | 24 ft |
| Main tubing size | 1/2 in |
Water supply
| Minimum flow needed | 6 gpm |
|---|---|
| Minimum water pressure | 40 psi |
| Backflow preventer included | No |
| Maximum water pressure | 75 psi |
| Connects to | Garden hose, through the Click-n-Go hose connect station |
Control
| Zones | 1 |
|---|---|
| Wi-Fi app | No |
| Needs a hub or bridge | not listed |
Install
| Power | None (manual) |
|---|---|
| Batteries | not listed |
Manufacturer figures, checked 2 Nov 2026. — means not listed.
Where to buy the Rain Bird 32HE Sprinkler System with Click-n-Go Hose Connect
- Rain Bird Store$79.99Go to Rain Bird Store (opens in a new tab)
Prices and stock change; the retailer’s page is always the final word.
No Canada price yet. Switch region in the header for US prices.
Rain Bird 32HE questions
Can I add a timer to the Rain Bird 32HE?
Yes. The kit has no timer, but Rain Bird’s guide shows its 1ZEHTMR battery hose timer as the optional add-on, fitted at the faucet ahead of the hose. That gives watering on chosen days with up to two start times, as on the 32ETI, which ships with the same timer and two more rotors. Bring the timer indoors before freezing weather.
How far apart should the 32HE sprinklers go?
About 15 to 20 ft apart, by Rain Bird’s guide, so each head’s spray reaches the next one (head-to-head coverage). Start 3 to 4 in in from a sidewalk or other straight edge where you can and measure the rest from there. Stake the heads on top of the lawn and test before burying, then move any head that leaves a dry gap.
Does the 32HE drain itself for winter?
Rain Bird describes it as self-draining: the two filtered drain valves at the run ends empty the lines after each use, as long as the tubing slopes down to them. Where winters freeze hard, also see our winterizing guide. For a compressed-air blowout, Rain Bird recommends hiring a local irrigation specialist because of the safety risks.